Ski Angle Gauge – Precision Base Edge Angle Measuring Instrument
$39.99 USD
Precision Ski Tuning Instrument
Know Your Edge. Own Your Turn.
Take the guesswork out of ski and snowboard base-edge measurement. Get a clear digital reading and inspect edge contact with integrated LED illumination.
When tuning ski and snowboard edges, small angle differences can change how an edge engages with the snow. This measuring instrument helps you check the actual base-edge angle instead of relying on guesswork.
Electronic dial gauge with a clear digital screen.
Fine 0.01 mm / 0.01° measurement resolution.
Integrated LED illumination for edge-contact inspection.
A practical combination of digital measurement, illuminated edge inspection and thoughtful storage for ski and snowboard tuning.
Fine Digital Measurement
The electronic dial gauge provides a clear numerical reading with resolution specified at 0.01 mm / 0.01°.
Illuminated Edge Inspection
Integrated LED illumination helps make small gaps easier to spot during the edge-contact check.
Protected Storage
A hard-shell transport case with a fitted foam insert keeps the instrument organized between uses.
Controlled Positioning
Fine-Tune The Contact. See The Detail.
The red rotary adjustment nut helps fine-tune the measuring position. Combined with the illuminated straight edge, it makes it easier to inspect contact between the tool and the ski edge.
Adjust the measuring position with the rotary nut.
Use LED illumination to inspect the contact gap.
Check multiple points along the edge for a more consistent assessment.
Use the instrument on a properly prepared, stable work surface and follow the included instructions for calibration and measurement.
A Clear Measuring Routine
From Setup To Reading.
Explore the four basic stages of measuring a ski or snowboard base edge. Select a step to see its instructions.
STEP 01 / 04
Prepare The Ski
Secure the ski on a stable work surface. Clean the base and edges, then check that the base is flat before measuring.
Understand The Difference
Explore Base Edge Angle References.
Even a small change in base-edge angle can influence how the edge engages with the snow. Select an example to explore the reference value.
These are general reference examples, not preset modes of the instrument or recommendations for every ski.
SELECT A REFERENCE ANGLE
0.5°
A smaller base-edge angle reference. Use measurement and your preferred tuning specification to verify the actual setup.
Built For The Workshop
Compact Tool. Considered Details.
From the easy-to-read digital gauge to the red rotary adjustment nut, each component supports a more controlled measurement process.
Large electronic screen for clear readings.
Battery-powered operation with no power outlet or cable required.
Red rotary adjustment nut for fine positioning.
Protective hard-shell case with fitted foam insert.
Technical Overview
Product Specifications.
Key details for planning your ski and snowboard tuning setup.
ProductSki Angle Gauge
ApplicationSki & Snowboard Base Edge
Resolution0.01 mm / 0.01°
DisplayLarge Electronic Screen
Edge InspectionIntegrated LED Straight Edge
AdjustmentRotary Adjustment Nut
PowerBattery Operated
Dimensions24.5 × 22 × 5 cm
Ready To Get Started
Everything In Its Place.
The kit includes the measuring instrument and essentials for storage and operation.