Hub Stand Kit – Wheel‑Free Alignment & Suspension Setup Stands (4‑Piece Set)

$44.99 USD
Precision Suspension Setup

Align With
Confidence.
Work Wheel-Free.

Get direct access to your vehicle's suspension setup with a four-piece hub-mounted stand kit. Designed for alignment adjustments, corner balancing work and suspension service without relying on a conventional wheel setup.

4-PIECE STAND SET 4 & 5-LUG COVERAGE STEEL BALL BASE DIY SETUP WORK
Check Vehicle Fit →
Four-piece hub mounted wheel-free alignment suspension setup stand kit
4-PIECE HUB STAND KIT
4Hub-Mounted Stands
4 & 5Lug Pattern Coverage
12″Base Dimensions
4Alignment Parameters
Hub stand mounted directly to a vehicle wheel hub with suspension exposed
A Different Way To Set Up

Work Directly
At The Wheel Hub.

Instead of reinstalling wheels during setup work, the stands bolt directly to the vehicle's wheel hubs. This creates an open working area around the suspension and gives you access to key adjustment points.

  • Mounts to the hub in place of the wheel
  • Opens access to suspension components
  • Useful for suspension bolt tightening workflows
  • Supports corner-weight and DIY alignment adjustments
Built Around The Setup Process

More Access.
More Control.

Thoughtful stand construction helps make suspension setup and alignment work easier to access and adjust.

Four hub-mounted stands in the complete kit
01 / DIRECT HUB MOUNTING

Mount At The Hub

Bolts to the wheel hubs in place of the wheels, opening up access to suspension components during setup.

Hub stand base components and steel ball movement system
02 / STEEL BALL BASE

Movement-Friendly Base

The steel ball base allows movement and helps eliminate suspension preload during setup work.

Hub stand in use near vehicle suspension and wheel alignment area
03 / ALIGNMENT WORKFLOWS

Support Key Adjustments

Designed to support camber, toe, caster and thrust-angle adjustment workflows.

Open Up The Working Area

Suspension Access
Without The Wheel Setup.

With the wheel removed and the stand mounted directly at the hub, key suspension areas become more accessible for adjustment and inspection workflows.

01Access suspension adjustment points more directly
02Work with the hub exposed during setup
03Use suitable measuring equipment to verify alignment readings
Vehicle suspension exposed with hub stand installed
From Hub Mounting To Adjustment

A More Accessible
Setup Workflow.

Explore how the wheel-free stand concept fits into a suspension setup process. Select each step to see the details.

Hub stand mounted to a compatible wheel hub
STEP 01 / 03

Mount At The Hub

Secure each stand to a compatible wheel hub using the correct mounting hardware and verified vehicle fitment.

Before You Choose

Check Your Hub Pattern.

Select your vehicle's lug configuration to review the corresponding fitment information listed for this kit.

Fitment Quick Check

Choose Your Lug Configuration

4-LUG FITMENT RANGE

4 × 95.25 – 4 × 114.3 mm

Listed 4-lug bolt pattern range: 4 × 95.25 mm to 4 × 114.3 mm (4 × 3.75″ to 4 × 4.5″).

12 / 14 mmStud Sizes
72.5 mmMax Hub Diameter
12″ × 12″Base Dimensions

Important: Use your vehicle's actual bolt pattern and stud size to confirm compatibility before ordering. This selector is a quick reference, not a vehicle-specific fitment guarantee.

Explore Adjustment Areas

One Setup.
Multiple Alignment Angles.

The kit is designed to support DIY adjustment workflows across several alignment parameters. Select an item to learn what it means.

Hub stand installed at exposed vehicle suspension for alignment setup
ALIGNMENT PARAMETER 01

Camber

Camber describes the inward or outward tilt of a wheel when viewed from the front of the vehicle. The hub stand setup provides access for adjustment work and checking the resulting setting.

Accurate readings require appropriate alignment measurement tools and the vehicle manufacturer's setup procedure.

Designed As A Complete Kit

Purposeful Components.
Ready For Setup.

The four-piece set combines the hub stands with thrust alignment cables and the hardware needed for the intended setup workflow.

Hub stand kit components, mounting hardware and thrust alignment cables laid out
01
4 × Hub StandsFour-piece stand set
02
1 × Set Of Thrust Alignment CablesFor alignment setup workflows
03
Mounting HardwareHardware for the intended setup
04
1 × User ManualSetup and usage reference

Optional base plates are recommended by the product listing for cracked floors or epoxy floor protection. They are not listed as standard included contents.

Product Details

Know The Setup Specifications.

Review the key dimensions and fitment information before preparing your vehicle and workspace.

Product TypeHub Stand Kit
Set Quantity4 Hub-Mounted Stands
Lug Pattern Coverage4-Lug & 5-Lug
Listed 4-Lug Range4 × 95.25 – 4 × 114.3 mm
Stud Sizes12 mm / 14 mm
Maximum Hub Diameter72.5 mm
Base Dimensions12″ × 12″
Base DesignSteel Ball Movement Base
Alignment WorkflowsCamber / Toe / Caster / Thrust Angle
Build A More Accessible Setup

Take Your Suspension
Work Further.

Get the hub-mounted stand setup designed to support wheel-free suspension access, corner balancing workflows and DIY alignment adjustments.

Check Your Vehicle Fit ↑

Always use properly rated vehicle support equipment on a suitable, stable surface. Confirm vehicle fitment, mounting hardware and safe installation procedures before use. This kit is a setup aid, not a substitute for vehicle support equipment or professional alignment measurement tools.

Example title